CPC Taoyuan Starts Up Sulfur Recovery Units with MECS® DynaWave® Scrubbing System from DuPont

CPC chose the DynaWave® scrubber for the high reliability of its outlet gas emissions when inlet gas SO2 concentration varies. This means there is no need to adjust DynaWave® equipment such as valves or pumps in order to meet strict emissions targets.

The Chinese Petroleum Corporation (CPC) awarded DuPont Clean Technologies (DuPont) the contract to supply the technology license, engineering and proprietary equipment for a MECS® DynaWave® wet gas scrubbing unit to be installed at its Taoyuan refinery in Taiwan in August 2015. This scrubbing system has recently gone into operation for two sulfur recovery units (SRUs) at the site, in time for CPC to comply with strict emissions reduction regulations.

In the past, seven to eight days were required after turnaround of the SRUs at the CPC refinery before acid gas could be fed to the units and commence normal operation. As a result, off-gas from the catalyst would be released directly to the stack and into the air, causing environmental issues. CPC researched different solutions to resolve these issues, and finally opted for the MECS® DynaWave® scrubber, a scrubbing technology licensed by DuPont.

“CPC chose the DynaWave® scrubber for the high reliability of its outlet gas emissions when inlet gas SO2 concentration varies,” explained William Lam, senior business development manager, Taiwan and Japan. “This means there is no need to adjust DynaWave® equipment such as valves or pumps in order to meet strict emissions targets. The SO2 removal efficiency of DynaWave® turns an average of 10,000 ppmv SO2 at the inlet into a guaranteed outlet of less than 50 ppmv SO2.” At startup, CPC technical teams measured only 10 ppmv SO2 at the stack outlet.

“Two 2-stage Claus…

Read the full article from the source…

Back to Top